← Back to productsLoading the 3D model
AQUALINK OF NORWAY
Plough anchor
Documented holding power in sand and clay
The AQUALINK plough anchor is developed for efficient penetration and high holding power in permanent aquaculture moorings.
Request a quoteProduct benefits
High holding power
Developed for sand and clay
Robust permanent-mooring design
Technical documentation
Product data
Verified dimensions, capacities and product specifications.
NS 9415:2021TRACEABILITYMBL
Plough anchor5 product variants
- Description
- AQUALINK 500
- Holding power*
- 25 tonnes
- Attachment MBL
- 75 tonnes
- Weight
- 500 kg
- Fluke area
- 1,43 m²
| Description | Holding power* | Attachment MBL | Weight | Fluke area |
|---|---|---|---|---|
| AQUALINK 500 | 25 tonnes | 75 tonnes | 500 kg | 1,43 m² |
| AQUALINK 750 | 32 tonnes | 96 tonnes | 750 kg | 1,81 m² |
| AQUALINK 1000 | 40 tonnes | 120 tonnes | 1000 kg | 2,26 m² |
| AQUALINK 1500 | 56 tonnes | 168 tonnes | 1500 kg | 3,00 m² |
| AQUALINK 2000 | 69 tonnes | 206 tonnes | 2000 kg | 3,89 m² |
DOCUMENTED QUALITY
Standards and traceability
The data apply to the stated models and dimensions. Products are supplied with marking and traceable documentation. Safety-critical components are developed and documented in accordance with NS 9415:2021. Material certificates document mechanical properties and traceability.
AQUALINK KNOWLEDGE
Questions and answers
Where are plough anchors used in aquaculture?
They are used for permanent anchoring of aquaculture sites and are designed for penetration and high holding power in sand and clay.
How is the correct anchor selected?
Selection is based on the site survey, seabed conditions, mooring analysis, design load and documented holding capacity.
Is holding power the same at every site?
No. Actual holding power depends on seabed conditions, installation, penetration and other local factors.